Project Log - April, 2005 
 Home

 Project News
 February 3, 2021

 Project Log
 Empennage
  Horizontal Stabilizer
  Vertical Stabilizer
  Rudder
  Elevators
  Rudder II

 Wing Kit
  Wings
  Fuel Tanks
  Ailerons
  Flaps

 Fuselage Kit
  Bulkheads
  Aft Section
  Foreward Section
  Top Fuselage
  Cabin

 Finish
  Canopy
  Cowling
  Electrical

 Firewall Forward
  Fuel System
  Engine
  Baffles
  Misc

 Miscellaneous
  Fiberglass
  Assembly
  Panel
  Finishing Up!
 FAQ
 Project Notes
 Project Summary
 Guestbook
 Other Stuff



  
April, 2005
April 2, 2005 - 0.5 hours
I been struggling with exactly how I wanted to support the spark plug wires leading back to the Mag. I decided to use some of that nylon corrugated tubing that is split down the side to put the plug wires in and then support that.

This is a picture of the spark plug wires supported in the split nylon tubing.

The spark plug wire support on the left side of the engine.

Another shot of the left side spark plug wires

April 2, 2005 - 1.5 hours
Still working on the emp tips. I think I have them all in generally right shape now they just need a little filling and sanding to get them just right. I did a little bit of the filling today but the sanding will have to wait until I get home from offshore.

<<March, 2005  Top  May, 2005>>
Disclaimer:
This web site and the infomation contained within it are for entertainment purposes only. The opinions expressed on construction techniques are my opinions only and should not be confused with proper construction techniques. There is undoubtedly more than one way to build an airplane and some methods that I use may or may not work in any given circumstance. If there is any question please call the kit manufacturer. I love to help but I am not responsible for the misuse of any information contained on this web site.

 February 3, 2021
 Email
 Home